Sentinel Powerlifter

I started this in March... Pilot is the servitor from the Stormraven, wired in to the cockpit with Dragonforge cables. Base is a cast from the Zone Mortalis tiles grafted onto a 60mm. Yellow has no washes, shaded and highlighted by hand.

Experiments with a Die Cutter

You may all remember a few years back when I had an old piece of GW terrain, laser cut. If you don't, go take a look, here So, fast forward to today, and with the aid of a die cutter, and some thin card, we have the following. Necromunda Tunnel Entrance. Just the raw card, assembled with the GW bulkhead. I went along and added rivets (252) and a few resin detail parts (Pardulon and DragonForge) And with Paint. Base was textured with a mix of Vallejo Oxide Paste and Black Lava.