I started this in March...
Pilot is the servitor from the Stormraven, wired in to the cockpit with Dragonforge cables.
Base is a cast from the Zone Mortalis tiles grafted onto a 60mm.
Yellow has no washes, shaded and highlighted by hand.
You may all remember a few years back when I had an old piece of GW terrain, laser cut. If you don't, go take a look, here
So, fast forward to today, and with the aid of a die cutter, and some thin card, we have the following. Necromunda Tunnel Entrance.
Just the raw card, assembled with the GW bulkhead.
I went along and added rivets (252) and a few resin detail parts (Pardulon and DragonForge)
And with Paint. Base was textured with a mix of Vallejo Oxide Paste and Black Lava.
I started playing Warhammer 40K around 1997, dabbling in Fantasy, Gorkamorka, Mordhiem, but my true passion is 40K and as such, has brought me to collect the models I started playing with. So, you'll see a lot of 2nd edition (and older) on here.